F/A-18 Full Wrap Maintenance Platform

F/A-18 Full Wrap Maintenance Platform

Model # FAI-FA-18-AL

The McDonnell Douglas F/A-18 Hornet is an all-weather supersonic, twin-engine, carrier-capable, multirole combat aircraft, designed as both a fighter and attack aircraft (hence the F/A designation).

The F/A-18 Aircraft Maintenance Platform was designed with direct input from aircraft service technicians. This full wrap around platform offers full fall protection and enhanced worker safety without obstructing the maintenance process. Featuring a heavy duty 800 lbs. capacity yet lightweight high-strength structural grade 5052 and 6061 aluminum construction. The F/A-18 Full Wrap Maintenance Platform conforms to, meets and exceeds all OSHA and ANSI requirements. This platform is easily mobile when necessary and securely locked in place during maintenance procedures.

Features:

The F/A-18 Full Wrap Platform is one of the sturdiest designs on the market. It’s made to withstand the beating that maintenance personnel dish out! Turnkey maintenance stand solutions include the design, engineering, fabrication, installation and training. All products evolve from end-user perspective from initial design through entire life cycle product and support.

Specifications:

Detailed specifications coming soon!

Benefits:

• Each modular platform is easily maneuvered by 1-2 personnel because of its lightweight and polyurethane coated casters. The tough iron core of the casters and its unique design allows it to be fully transported by truck and easily set up in minutes by 2 personnel.
• Allows for assembly and disassembly of the platform, allowing the platform to be stored out of the way.
• All of the walking surfaces are equipped with anti-slip surfaces to help minimize any slips or falls.
• The individually operated extension sliders equipped with rubber padding allow for the user to custom fit each stand to the aircraft. 
• Guardrails in compliance with OSHA requirements are included around all open edges of the working platform. The top of the guardrails on the top platform are 42 inches above the top deck with a proper mid-rail, and can sustain 200 lb. lateral loading forces for safety.
• Four-inch high toe-boards provided.
• leveling Jacks allow for raising and lowering the platform allowing the operator to adjust the platform height without the need for a fork lift. 
  
• The stand can be moved/transported in two ways. The stand is mounted on heavy duty 12” swivel casters with polyurethane wheels. Swivel locks (90 degree increments), full face wheel brakes, and toe guard options are included. A hinged tow bar may also provided for moving with machine.
• Optional air and electrical utility stations are available upon request. 
• Optional lighting is available. 

Documentation - Upon Request
The following documentation will be provided at the completion of the project upon request.

  • All MSDS documentation for all coating processes and hazardous materials.
  • A Certificate of Conformance (COC) for each stand signed by our QA representative.
  • Two hard-copy sets of operation and maintenance manuals will be provided.
  • Operation and maintenance manuals will also be provided in electronic format.
        O&M manuals will include:
            o Safety Hazards and Cautions
            o Correct Operating Procedures
            o Recommended Preventative Maintenance Schedule
            o Suggested Spare Parts

Shipping and Delivery
Shipping in the form of a dedicated flatbed with tarps to protect from road grime in transit may be priced as an individual line item. Customers can opt to take care of their own freight collect.

**NOT INCLUDED IN THE LISTED ESTIMATE COSTS**
- PE stamped or approved drawings (if required).
- Replacement parts as required under warranty.
- Labor and other costs associated with the Physical Configuration Audit (PCA).
- Travel, lodging, salary, incidentals, and other associated costs/ labor hours for: Systems engineering and Critical Design Review attendances.
- Travel, lodging, salary, incidentals, and other associated costs/ labor hours for: Personnel to accompany the first delivery, and any material/ equipment/ labor costs for correcting any failures to meet the requirements of the Performance Specification (Appendix A) at no cost to the government. This shall include but is not limited to design changes along with associated work stand modifications and documentation updates, shipping and/or travel required to correct deficiencies.

Also available in FRP composite construction; Model# FSC-FA-18-C 

Composites offer several advantages; they are much more environmentally responsible, more effective and resourceful than traditional non-renewable material. Composites are non-magnetic, non-sparking, corrosion resistant, slip resistant, lightweight for reduced freight & install costs, impact resistant, fire-retardant and non-conductive for either heat or electricity.

Fabrication Authorities International can custom fabricate virtually any type of Aviation Work Platform. Our expertise includes in-house research and development, fully integrated manufacturing and an extensive materials line. With years of design, engineering and manufacturing experience, our dedicated staff can assist you from concept to completion in a timely fashion. All of our ladders are made in the USA and meet OSHA and ANSI 3124 standards.

Please call for additional options or custom designs.
Fabrication Authorities International, LLC. Is your new “total access” solution.
We can customize most Industrial Maintenance Platforms to your specific needs. 
Please call (877) 324-9990 or (727) 324-4620

Email us at sales@industrial-platforms.com