FRP Composite HS Armor and Storm Panels

FRP Composite HS Armor and Storm Panels

HS Armor Fiberglass Armor and Storm Panels are designed for ballistics resistance. The panels are manufactured using specially constructed glass reinforcements in a proprietary resin matrix. The panel components are then cured in a controlled cycle.

HS Armor Panels

When struck by a bullet or other projectile, HS Armor panels delaminate in a way that absorbs the energy and stops the projectile. Thousands of these panels have been purchased by the military, law enforcement, and numerous private and public sector organizations to provide an extra layer of protection for its people.

HS Armor panels have been independently tested to Underwriter’s Laboratory (UL) 752 and National Institute of Justice (NIJ) Ballistics Specifications. Regarding fire performance, HS Armor panels are self-extinguishing and meet a UL 94 V-0 flammability rating.

Panels are available in any length practical, widths up to 4', and in thicknesses from ¼" to ½". Panels are typically tested in accordance with Underwriters Laboratories (UL) 752 requirements for Levels 1-8 (including Supplementary Shotgun), although other options are available upon request.

Common Applications:

• Judge's Benches
• Jury Boxes
• Convenience Stores
• Classrooms
• Bank Teller Areas
• Panic Rooms and Safe Rooms
• Storm Shelters
• Office Buildings

How to Order

In addition to indicating panel width and length dimensions (max panel width is 4' in any length practical), it is vital to indicate the ballistic performance required, which will determine panel thickness and configuration. Panels, as manufactured, range in thickness from ¼" to ½". If final thickness is to be greater than ½", panels must be layered to meet more demanding ratings. For panels greater than ½" thick, indicate whether panels are to be bonded or will be layered/bonded in the field during installation.

Teasting and Requirements

HS Armor panels are internally tested on a regular basis for conformance to Underwriters Laboratories (UL) 752 requirements and independently tested to verify results. Testing data is available upon request. Additionally, HS Armor panels can be tested to a number of other domestic and international ballistic standards and protocols (NIJ, SD, MIL, etc.), or to a set of specific customer performance requirements. See testing videos below.

Click Here - HS Armor Ballistic Panel Testing - UL Levels 1,2,3 protection Slow Motion

Fabrication and Installation

HS Armor panels can be cut and drilled using ordinary carpenter’s tools. A carbide or diamond grit edge blade is recommended for cutting. It is recommended to use high speed
drill bits at slow speeds when drilling - carbide tipped drills are best for all drilling operations. Installation and attachment of panels to existing structures is easily accomplished with bolts, screws, or industrial grade adhesive.

HS Armor panels can be attached to most substrates with adhesives, such as construction adhesive. For stronger adhesion, especially to non-porous substrates, including aluminum, steel and stainless steel, a two-part epoxy is recommended.

HS Armor panels can be painted using high quality water- or oilbased paints. Urethane and epoxy paints/coatings will provide a more durable finish. For external applications, a paint with a UV inhibitor should be used to protect the armor panels from longterm UV exposure.

HS Storm Panels

Fiberglass HS Storm Panels are designed for high impact performance. The panels are made with a proprietary resin mix and fiberglass fabric consisting of woven rovings to create panels that absorb large amounts of impact energy. Independent testing at Texas Tech University's Wind Science and Engineering Research Center has verified HS Storm Panels meet the criteria of FEMA 320 and are suitable for above ground shelter sheathing.

Common Applications:

• Shutters
• Wall Panels
• Door Inserts
• Window Coverings
• Bank Teller Areas
• Panic Rooms and Safe Rooms
• Storm Shelters

The videos available below allow you to see the performance of HS Storm Panels in the simulated environments of both a hurricane and tornado.

Click Here - HS Storm Armor Panel Testing - Tornado Simulation

Click Here - HS Storm Armor Panel Testing - Hurricane Simulation

To meet FEMA 320 standards, a panel must withstand a 15 lb. 2x4 timber missile propelled at 100 mph. This relates to a missile propelled horizontally by a 250 mph ground speed tornado. The 1/4" thick HS Storm Panel meets the FEMA 320 criteria whereas 5 layered sheets of 3/4" thick plywood failed. 

Fabrication Authorities International serves the aviation, automotive, packaging, building & construction, utility, mining, aerospace, and other specialty trades along with industrial markets by bringing design, engineering, production, manufacturing, and distribution of high quality products to our customers. We are committed to providing quality cost-effective products to suit your requirements. We specialize in developing solutions to meet your unique workplace safety needs. Whether you need an on-the-shelf product, need an existing product altered, or a completely new product engineered, fabricated, and delivered, Fabrication Authorities International has the knowledge and experience to get the job done. Contact our friendly and knowledgeable sales technicians for a professional consultation today!

Please call for additional options or custom designs.
Fabrication Authorities International, LLC. Is your new “total access” solution.
We can customize most Industrial Maintenance Platforms to your specific needs. 
Please call (877) 324-9990 or (727) 324-4620 or (727) FAI-INC-0
Fax us your request at (888) 909-6780

Email us at sales@industrial-platforms.com